1. Part number / productFirst Article Builder
Price$49/mo flat per shop
StatusBeing built: not open yet
Free template

Excel, three sheets

Blank AS9102 Rev C Forms 1–3, as an Excel file

One workbook with Form 1, Form 2 and Form 3 on separate sheets, labelled with the Rev C field numbers. Free to download: no email, no account.

Download the Excel templateas9102-rev-c-forms-1-3.xlsx · about 20 KB

Opens in Excel, LibreOffice and Google Sheets. Form 3 has 60 numbered rows; add more as you need them. Our own layout, not the official form.

Filling in Form 3? Our field-by-field guide to AS9102 Form 3 explains each column, with a worked example.

What's in it

The three forms

1Part number accountability

Which part, drawing and revision this first article covers, who made it, and whether it is a full or partial FAI and why. It lists any sub-assemblies with their own reports and holds the sign-off (fields 20–25).

2Product accountability

The raw materials, special processes and functional tests behind the part: each with its specification, supplier code and certificate or report number.

3Characteristic accountability

One row per design characteristic on the drawing: where it is, the requirement, the measured result, any designed tooling and the nonconformance number if it failed.

Rev B or Rev C

Comments: field 12, not 14

On Rev C Form 3, the optional comments column is field 12. Rev B forms numbered it 14, because 12 and 13 were a signature and a date. Rev C has no signature or date on Form 3: the report is signed on Form 1 (fields 20–23). If a customer's older template says “14. Comments”, it is the Rev B layout.

Sources: L3Harris supplier FAI requirements QA-01.1.1, AS9102C forms table, effective 2024-02-20 (PDF); IAQG's Rev B Form 3 Word file, February 2020 (DOC); both read 2026-11-18.

Already filled in

Open your Excel Form 3 in the app

If you keep Form 3 in this template or your own Excel sheet, the app's “Open Form 3 from Excel” reads it in your browser (nothing is uploaded). It finds the columns by their header names (characteristic number, reference location, designator, requirement, results, tooling, nonconformance number, comments; Rev B's “14. Comments” too), and each row waits for its balloon: click the drawing and the next row is placed there.

Please note

You still need the standard

This is general information, not quality-system or contract advice. The forms belong to AS9102, published by SAE International and the IAQG. This workbook only reproduces the field numbers and names, in our own layout; what each field must contain is defined in the standard, and you need your own copy of it. Your customer's purchase order may add requirements. First Article Builder is not affiliated with or endorsed by SAE International or IAQG.

Fill it in the browser instead